NSK微精密
高品質組成的徑向滾珠軸承內圈,外圈,球籠和密封。[功能]高質量直徑較小的球軸承可從Φ2(內徑2毫米)。- - - - - -The most commonly used radial ball bearing consisting of inner ring, outer ring, ball, cage, and seal.-In addition to radial load, axial load in both directions can be applied.-The flanged type is a deep groove ball bearing with a brim on one side of the outer ring, and since it is not necessary to provide a shoulder on the inner diameter of the housing, highly accurate through-hole machining is possible.-With a flange, the side surface of the housing can be attached as a reference, and it is necessary to accurately process the squareness of the side surface.[Applications]-The most suitable for applications where the friction torque is small, high-speed rotation is required, and low noise and low vibration are required.
現在配置
船隻一旦 | 同樣的一天 |
---|
庫存物品包括
NSK微精密
不需維護的滾珠軸承與高性能潤滑脂和盾類型。[功能]
——微型軸承,可以攜帶一個徑向載荷和一個方向的軸向載荷。
——軸向負荷能力高,內環和外環上的凹槽加載接收方的深。
——接觸角設置為45°,軸向剛度高。
——雙方都屏蔽鋼板和油脂密封。
・正常情況下,兩個軸承是反對彼此和內部間隙調整之前使用。(應用程序)
合適的支持球螺絲。
現在配置
船隻一旦 | 同樣的一天 |
---|
庫存物品包括
NSK微精密
球軸承的一種,是抵抗豎向荷載(軸向載荷)對軸承。[功能]負載隻有單向軸向載荷。可以承受沉重的負荷。- - - - - -High quality thrust ball bearings by a manufacturer specializing in small diameters. Available from Φ2 (inner diameter 2 mm).-Thrust ball bearing: Since the track is flat, the friction torque is small.・ Grooved thrust ball bearings have track grooves on the upper and lower track boards to ensure a higher rated load.-Grooved thrust ball bearings suppress the movement of the ball and cage during rotation, reducing contact with the shaft and housing.[Applications]-Thrust ball bearings: For low loads and low speeds.-Grooved thrust ball bearings: For high loads.
現在配置
船隻一旦 | 同樣的一天 |
---|
庫存物品包括
品牌 |
---|
產品係列 |
計算機輔助設計 |
天的船 |
類型 |
內/外環的材料 |
軸承的風格 |
外環的形狀 |
精度 |
內徑d(Ø) |
外徑D(Ø) |
寬度B(毫米) |
基本動態負載評級(N) |
規範環境 |
加載方向 |
水溝環的行數 |
標準尺寸 |
滾動體材料 |
接觸角 |
|
|
|
|
品牌 | NSK微精密 |
NSK微精密 |
NSK微精密 |
產品係列 | |||
計算機輔助設計 |
|
|
|
天的船 | 同樣的一天 庫存物品包括 |
同樣的一天 庫存物品包括 |
同樣的一天 庫存物品包括 |
類型 | 球 | 角軸承(單一) | 止推軸承 |
內/外環的材料 | 鋼/不鏽鋼 | 鋼/不鏽鋼 | 鋼 |
軸承的風格 | 開放式/雙屏蔽/橡膠密封類型 | 雙屏蔽 | 開放式 |
外環的形狀 | 標準/法蘭 | 標準 | 標準 |
精度 | 類0 (ABEC-1) | 類5 | 類0 (ABEC-1) |
內徑d(Ø) | 1 ~ 10 | 2 ~ 8 | 2 ~ 10 |
外徑D(Ø) | 3 ~ 19 | 6 ~ 19 | 6 ~ 20 |
寬度B(毫米) | 1 ~ 6 | 3 ~ 13.6 | 3 ~ 7 |
基本動態負載評級(N) | 68 ~ 2340 | 470 ~ 4000 | 143 ~ 4707 |
規範環境 | 標準 | 標準 | 標準 |
加載方向 | 徑向 | 徑向 | 推力 |
水溝環的行數 | 單線 | 單線 | 單線 |
標準尺寸 | 公製係列 | 公製係列 | 公製係列 |
滾動體材料 | 鋼/不鏽鋼 | 鋼/不鏽鋼 | 鋼 |
接觸角 | - - - - - - | - - - - - - | - - - - - - |
加載……
我們怎樣才能改善呢?
我們怎樣才能改善呢?
雖然我們不能直接回應評論提交這種形式,將成為未來的改進了的信息。
客戶隱私政策
謝謝你的合作。
雖然我們不能直接回應評論提交這種形式,將成為未來的改進了的信息。
請使用調查形式。
客戶隱私政策