MenuClose
100x100 Aluminum Extrusion - 6 Series, Base 50
Due to increased freight costs, some of the products below may have increased pricing for lengths of 2500mm+.
HFS6 Series 50mm and 100mm SQ. extrusions.
- Rapid Design
Edit Part Configuration
Part Number
Configure to get your Part Number
Specifications
| Part Number | - | L |
| hfs6 - 100100 KHFSB6-100100 |
- - |
800 4000 |
■Configurable Length Extrusions
[ ! ]Applicable to 6000mm depending on products.
[ ! ]For some extrusions, MISUMI may be unable to accept the order.
Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.
■Fixed Length Extrusions (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
[ ! ]"Effective Length 4000mm" represents the extrusion with 4000mm or more effective length.
(several cm)
| Type | Material | Surface Treatment | Part Number | L 0.5mm Increment | Mass kg/m |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | |||||||
| HFS | A6N01SS-T5 Aluminum Alloy | Clear Anodize | hfs6 - 100100 | 50~4000 | 5.52 | 2043 | 265.2x104 | 265.2x104 |
| HFS | A6N01SS-T5 Aluminum Alloy | 黑色陽極電鍍 | HFSB6-100100 | 50~4000 | 5.52 | 2043 | 265.2x104 | 265.2x104 |
[ ! ]For some extrusions, MISUMI may be unable to accept the order.
Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.
■Fixed Length Extrusions (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
| Type | Material | Surface Treatment | Part Number | L mm |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | ||||||
| HFS | A6N01SS-T5 Aluminum Alloy | Clear Anodize | KHFS6-100100 | 4000 | 2043 | 265.2x104 | 265.2x104 |
(several cm)
Alterations
Alterations are not applicable to all frames.
| Category | Alteration Names | Codes | Explanations | Catalog Page |
| Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service | Ｐ2-679&680 | |||
| End Tapping | End Tapping on Center Hole | LTP/RTP/TPW LHP/RHP/HPW |
Add tappings on frame ends. | Ｐ2-681 |
| End Tapping 4 Corner Holes | LSP/RSP/SPW | p2 - 692 | ||
| 指定如何削減 | Precision Cut | SC | Change total length tolerance. (Ｌ±0.5→Ｌ±0.2) Available only for Ｌ≦1500 |
Ｐ2-682 |
| 45 deg Cut | L_T45/R_T45 | Cut at 45 deg angle. | ||
| Wrench Access Holes | Wrench Access Hole at Fixed Position | LWP/RWP | Add wrench access holes at fixed position for blind joints. | Ｐ2-683&684 |
| Wrench Access Hole at Specified Position | AH/BH/AV/BV | Add wrench access holes at specified position for blind joints. | Ｐ2-685&686 | |
| Counterbores | Counterbores at Specified Position | Z6/XA100 | Add counterbores at specified position. Use the holes for connecting the frames and a table top. |
Ｐ2-687 |
| Holes for Specific Blind Joint Type | D Hole | LDH/RDH | Add holes needed for Single Joint connection. | Ｐ2-688 |
| S Hole | LSH/RSH | Add holes needed for pre-assembly double joint connection. | Ｐ2-689 | |
| M Hole | LMH/RMH | Add holes needed for post-assembly double joint connection. | Ｐ2-690 | |
| L Hole | JLP/KLP | Add holes needed for parallel joint connection. | Ｐ2-691 | |
| Other Alterations | GNFS/GFS Series End Tapping | LTS/RTS/TSW | Add end tappings on high rigidity frames. | p2 - 692 |
| HFSR Series End Tapping | LTS/RTS/TSW | Add end tappings needed for adding a protection cover on the end fo HFSR series frame. | ||
Part NumberBeing Previewed:
- Please use our configuration tools to update this preview to your specific part.
Loading...
Loading...
Basic Information
| Standard Extrusion Size(mm) | 100 | Extrusion Size | 100x100 | Extrusion Series | 6 Series |
|---|---|---|---|---|---|
| Extrusion Shape | Square | Extrusion Type | HFS (Standard) | Number of Grooved Surfaces | Four Side Slots |
| Surface Milled | None | Material | A6N01SS-T5 Aluminum Alloy | Extrusion Size - Width (A)(mm) | 100 |
| Extrusion Size - Thickness (T)(mm) | 100 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer tomanufacturer catalogs.
Frequently Asked Questions (FAQs)
- Question: What is the load capacity of this extrusion?
- Answer: The formulas to determine load capacity of extrusions can be found at://www.seojaguars.com/pdf/fa/2010/p2431.pdf
- Question: What is the length tolerance of this extrusion?
- Answer: The standard length tolerance is +/-0.5mm.
- Question: What is the standard surface treatment of these aluminum extrusions?
- Answer: Unless specified otherwise (selecting black anodize, etc.), clear anodizing is used as a standard surface treatment to help protect the extrusion.
Additional Products in this Category
- 30x30, 30x20 Aluminum Extrusion - Mixed Series 5/6, Base 30
- 40x40, 40x20 Aluminum Extrusion - Mixed Series 6/8, Base 40
- 20x20 Aluminum Extrusion - 5 Series, Base 20, One Closed Side
- 20x40 Aluminum Extrusion - 5 Series, Base 20, One Closed Side
- 30x60 Aluminum Extrusion - 6 Series, Base 30, Two Adjacent Closed Sides
- 80x80 Aluminum Extrusion - 8 Series, Base 40, One Closed Side
- 45x45 Aluminum Extrusion - 8-45 Series, Base 45
- 50x100 Aluminum Extrusion - 8-45 Series, Base 50
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please usethe inquiry form.
Customer Privacy Policy