發貨的天數 |
|
---|
misumi.
[Application]
・Cutting direct gates by attaching to a dedicated stand.
·用於連接自動機器和夾具。
·用於切割各種電線。
[特征]
・Changing the intake position
它有兩個空氣入口,可以根據安裝位置改變。入口也可以通過180°調節180°以容易地處理軟管。
・ Round type
在圓形的原樣時,可以進行細小角度調整。
·平方類型
提供5個螺紋表麵,使機器上易於安裝。
立即配置
Ships as soon as | 4 Days |
---|
misumi.
[Application]
・Mount on a universal chuck.
·安裝在閘門切割機器人上。
用於在閘門切割台和備用夾具上注射成型閘門切割。
[特征]
·瘦身。Ideal for gate cut robots and stand-by jigs.
·可以調節刀片開口以靠近工件切割,從而精確完成。
・ Slide stroke amount (0~3 mm)
立即配置
Ships as soon as | 4 Days |
---|
misumi.
[Application]
・Mount on a universal chuck.
·安裝在閘門切割機器人上。
用於在閘門切割台和備用夾具上注射成型閘門切割。
[特征]
·瘦身。對於窄間距產品,如多腔。
·由於負載不平衡,平滑滑動滑動減輕了故障。
立即配置
Ships as soon as | 4 Days |
---|
misumi.
[Application]
・Cutting direct gates by attaching to a dedicated stand.
·用於連接自動機器和夾具。
·用於切割各種電線。
[特征]
・Changing the intake position
它有兩個空氣入口,可以根據安裝位置改變。入口也可以通過180°調節180°以容易地處理軟管。
・ Round type
在圓形的原樣時,可以進行細小角度調整。
立即配置
Ships as soon as | 4 Days |
---|
misumi.
[Application]
·圓形和方形空氣鉗的刀片..
·安裝在專用支架上並用於直接閘門切割。
・ Installation to the gate cut robots and jigs.
For various wire cuts.
[特征]
・Changing the intake position
它有兩個空氣入口,可以根據安裝位置改變。入口也可以通過180°調節180°以容易地處理軟管。
立即配置
Ships as soon as | 4 Days |
---|
misumi.
[Application]
・Blades for sliding air nippers..
・Mounting on a flexible chuck plate.
・ Installation to the gate cut robot.
對於樹脂成型的各種柵極切口,例如柵極切割桌子和備用夾具。
立即配置
Ships as soon as | 4 Days |
---|
品牌 |
---|
Product Series |
CAD |
發貨的天數 |
Applicable base |
Blade type |
Blade tip type |
Presence of Slide Base |
Slide Method |
Cutting Edge Shape |
Component Parts |
|
|
|
|
|
|
|
品牌 | misumi. |
misumi. |
misumi. |
misumi. |
misumi. |
misumi. |
Product Series | ||||||
CAD |
|
|
|
|
|
|
發貨的天數 | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Applicable base | - | 用於垂直幻燈片 | For horizontal slide | - | - | For horizontal slide |
Blade type | - | - | - | - | 用於圓形和方形 | For sliding type |
Blade tip type | - | - | - | - | Forward blade | 前刀片/反向刀片 |
Presence of Slide Base | - | N/A | 可用的 | - | - | - |
Slide Method | 正方形 | Pull type / Push type | Pull type / Push type | 圓形類型 | - | - |
Cutting Edge Shape | - | - | - | - | - | 具有芯片/曲柄葉片的樹脂/直碳化物的直/直的長/直薄刀片/刀片 |
Component Parts | 正方形 | Slide Method | Slide Method | 圓形類型 | - | Slide Method |
loading ...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
客戶隱私政策
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
請用the inquiry form。
客戶隱私政策