硬質合金T-Slot刀具,2槽/ 4槽,角角
零件號
Configure to get your Part Number
零件號 |
---|
STSCAEM4- [2-4 / 0.1] - [0.5-4 / 0.1] - [2-4 / 0] - [1.5-2 / 0.1] - [0.2-3.8 / 0.05] - [30-155 / 0.1] |
STSCAEM6- [5-6 / 0.1] - [1-5 / 0.1] - [2-6 / 0] - [3-4 / 0.1] - [0.2-4.8 / 0.05] - [30-155 / 0] |
Stscaem.8.-[6.1-8/0.1]-[1-5/0.1]-[2-8/1]-[4-6/0.1]-[0.2-4.8/0.05]-[30-155/1] |
Stscaem10- [8.1-10 / 0.1] - [1-5 / 0.1] - [2-10 / 0.1] - [5-7 / 0.1] - [0.2-4.8 / 0.05] - [30-155/1] |
Stscaem12- [10.1-12 / 0.1] - [1-5 / 0.1] - [2-12 / 0.1] - [6-8 / 0.1] - [0.2-4.8 / 0.05] - [30-155 / 1] |
Stscaem16- [12.1-16 / 0.1] - [1-5 / 0.1] - [2-16 / 0.1] - [8-12 / 0.1] - [0.2-4.8 / 0.05] - [30-155 / 0. |
Stscaem.W4-[2-4/0.1]-[0.5-4/0.1]-[2-4/1]-[1.5-2/0.1]-[0.2-3.8/0.05]-[30-155/1] |
Stscaem.W6-[5-6/0.1]-[1-5/0.1]-[2-6/1]-[3-4/0.1]-[0.2-4.8/0.05]-[30-155/1] |
Stscaem.W8-[6.1-8/0.1]-[1-5/0.1]-[2-8/1]-[4-6/0.1]-[0.2-4.8/0.05]-[30-155/1] |
Stscaemw10- [8.1-10 / 0.1] - [1-5 / 0.1] - [2-10 / 0] - [5-7 / 0.1] - [0.2-4.8 / 0.05] - [30-155 / 0] |
Stscaem.W12-[10.1-12/0.1]-[1-5/0.1]-[2-12/1]-[6-8/0.1]-[0.2-4.8/0.05]-[30-155/1] |
Stscaemw16- [12.1-16 / 0.1] - [1-5 / 0.1] - [2-16 / 0] - [8-12 / 0.1] - [0.2-4.8 / 0.05] - [30-155/1] |
loading ...
Model Number | Blade Diameter D. 0.1毫米單位規格 |
葉片寬度 ℓ 0.1毫米單位規格 |
Neck Length ℓ1 1mm Unit Specification |
頸部直徑* D.1 0.1毫米單位規格 |
邊緣寬度 B. 0.。0.5 mm Unit Specification |
Both Corners θ. 1°Unit Specification |
總體長度 L. |
|
柄徑 D. |
||||||||
Stscaem. (2-flute) Stscaem.W (4.-flute) |
4. | 2.0至4.0 | 0.5至4.0. | 2 to 4 | 1.5至2.0 | 0.20≤b≤ℓ−0.2 | 3.0.°to155° | 50 |
6. | 5.0 to 6.0 | 1。0.to 5.0 | 2 to 6 | 3.0至4.0 | 6.0. | |||
8. | 6.1至8.0 | 1。0.to 5.0 | 2到8 | 4.。0.to 6.0 | 6.0. | |||
10. | 8.1到10.0 | 1。0.to 5.0 | 2 to 10 | 5.0 to 7.0 | 8.0. | |||
12 | 10.。1to 12.0 | 1。0.to 5.0 | 2 to 12 | 6.0至8.0 | 8.0. | |||
16. | 12.1 to 16.0 | 1。0.to 5.0 | 2 to 16 | 8.0至12.0 | 10.0. |
*請注意,如果頸部直徑不滿足條件“2≤ D −D.1", products are not available.
點擊此處查看切割條件
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
客戶隱私政策
謝謝您的合作。
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
請用the inquiry form。
客戶隱私政策