硬質合金T-Slot刀具,2槽/ 4槽,雙角度
零件號
Configure to get your Part Number
零件號 |
---|
STSWAGEM4- [2-4 / 0.1] - [0.5-4 / 0.05] - [2-5 / 0] - [1.5-2 / 0.1] - [30-155 / 1] |
斯巴格6.-[5-6/0.1]-[1-5/0.1]-[2-6/1]-[3-4/0.1]-[30-155/1] |
斯巴格8.-[6.1-8/0.1]-[1-5/0.1]-[2-8/1]-[4-6/0.1]-[30-155/1] |
斯巴格10.-[8.1-10/0.1]-[1-5/0.1]-[2-10/1]-[5-7/0.1]-[30-155/1] |
Stswagem12- [10.1-12 / 0.1] - [1-5 / 0.1] - [2-12/1] - [6-8 / 0.1] - [30-155 / 1] |
斯巴格16.-[12.1-16/0.1]-[1-5/0.1]-[2-16/1]-[8-12/0.1]-[30-155/1] |
斯巴格W4-[2-4/0.1]-[0.5-4/0.1]-[2-5/1]-[1.5-2/0.1]-[30-155/1] |
斯巴格W6-[5-6/0.1]-[1-5/0.1]-[2-6/1]-[3-4/0.1]-[30-155/1] |
Stswagemw8- [6.1-8 / 0.1] - [1-5 / 0.1] - [2-8 / 1] - [4-6 / 0.1] - [30-155 / 1] |
Stswagemw10- [8.1-10 / 0.1] - [1-5 / 0.1] - [2-10 / 0.1] - [5-7 / 0.1] - [30-155 / 1] |
Stswagemw12- [10.1-12 / 0.1] - [1-5 / 0.1] - [2-12/1] - [6-8 / 0.1] - [30-155 / 1] |
Stswagemw16- [12.1-16 / 0.1] - [1-5 / 0.1] - [2-16 / 0] - [8-12 / 0.1] - [30-155 / 1] |
loading ...
Model Number | 刀刃D.iameter D. 0.1毫米單位規格 |
刀刃寬度* ℓ 0.1毫米單位規格 |
頸部長度 ℓ1 1mm Unit Specification |
頸部直徑* D.1 0.1毫米單位規格 |
Both Corners θ. 1°Unit Specification |
總體長度 L. |
|
柄徑 D. |
|||||||
斯巴格 (2-flute) 斯巴格W (4.-flute) |
4. | 2.0to4.0 | 0.5至4.0 | 2到5 | 1.5到2.0 | 3.0.°to155° | 50 |
6. | 5.0 to6.0 | 1。0.to 5.0 | 2到6 | 3.0到4.0 | 6.0. | ||
8. | 6.1至8.0 | 1。0.to 5.0 | 2到8 | 4.0to6.0 | 6.0. | ||
10. | 8.1到10.0 | 1。0.to 5.0 | 2 to 10 | 5.0 to7.0 | 8.0. | ||
12 | 10.。1to 12.0 | 1。0.to 5.0 | 2 to 12 | 6.0to8.0 | 8.0. | ||
16. | 12.1到16.0. | 1。0.to 5.0 | 2 to 16 | 8.0至12.0 | 10.0. |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
客戶隱私政策
謝謝您的合作。
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
請用the inquiry form。
客戶隱私政策