Carbide Straight Blade Tapered Corner Angle End Mill, 2-Flute, with Chamfering Blade
Part Number
Configure to get your Part Number
Part Number |
---|
STCACMEM4-[0.5-2.5/0.01]-[5-85/1]-[0-59/1]-[0.1-1.15/0.01]-[0-30/1]-[0-59/1]-[0.5-8/0.5]-[0.5-1.7/0.1]-[F,T] |
STCACMEM4-[0.5-2.5/0.01]-[5-85/1]-[0-59/1]-[0.1-1.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-1.7/0.1]-[F,T] |
STCACMEM6-[0.5-4.5/0.01]-[5-85/1]-[0-59/1]-[0.1-2.15/0.01]-[0-30/1]-[0-59/1]-[0.5-10/0.5]-[0.5-2.7/0.1]-[F,T] |
STCACMEM6-[0.5-4.5/0.01]-[5-85/1]-[0-59/1]-[0.1-2.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-2.7/0.1]-[F,T] |
STCACMEM8-[0.5-6.5/0.01]-[5-85/1]-[0-59/1]-[0.1-3.15/0.01]-[0-30/1]-[0-59/1]-[0.5-12/0.5]-[0.5-3.7/0.1]-[F,T] |
STCACMEM8-[0.5-6.5/0.01]-[5-85/1]-[0-59/1]-[0.1-3.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-3.7/0.1]-[F,T] |
STCACMEM10-[0.5-8.5/0.01]-[5-85/1]-[0-59/1]-[0.1-4.15/0.01]-[0-30/1]-[0-59/1]-[0.5-14/0.5]-[0.5-4.7/0.1]-[F,T] |
STCACMEM10-[0.5-8.5/0.01]-[5-85/1]-[0-59/1]-[0.1-4.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-4.7/0.1]-[F,T] |
STCACMEM12-[0.5-10.5/0.01]-[0-85/1]-[0-59/1]-[0.1-5.15/0.01]-[0-30/1]-[0-59/1]-[0.5-16/0.5]-[0.5-5.7/0.1]-[F,T] |
STCACMEM12-[0.5-10.5/0.01]-[0-85/1]-[0-59/1]-[0.1-5.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-5.7/0.1]-[F,T] |
STCACMEM16-[0.5-14.5/0.01]-[5-85/1]-[0-59/1]-[0.1-7.15/0.01]-[0-30/1]-[0-59/1]-[0.5-20/0.5]-[0.5-7.7/0.1]-[F,T] |
STCACMEM16-[0.5-14.5/0.01]-[5-85/1]-[0-59/1]-[0.1-7.15/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D]-[0.5-7.7/0.1]-[F,T] |
Loading...
Model Number | Blade Diameter D 0.01mm Unit Specification |
Corner Angle (Single corner) θ1 °−min 1' Unit Specification |
Angle Width D1 0.1 mm Unit Specification |
Single Corner θ2 °−min 1' Unit Specification |
Blade Length*ℓ 0.5mm Unit Specification |
Chamfering Blade Width* CM 0.1 mm Unit Specification |
Bottom Blade Shape (Selection) |
Blade ℓ1 |
Overall Length L |
||
Shank diameter d |
|||||||||||
Specified Range | ℓmax. | ||||||||||
STCACMEM | 4 | 0.50 to 2.50 | 5°0' to 85°0' | 0.1 ≤ D1≤ (D−0.2)/2 | 0°15' to 30°0' | (1)0.5 ≤ℓ≤ D×4 and (2)ℓ≤ℓmax. (See table at right) and (3) |
8.0 | 0.5 ≤ CM ≤* | T (Indented Center) F (Flat) |
ℓ1 = ℓ+CM | 50 |
6 | 0.50 to 4.50 | 10.0 | 60 | ||||||||
8 | 0.50 to 6.50 | 12.0 | 60 | ||||||||
10 | 0.50 to 8.50 | 14.0 | 80 | ||||||||
12 | 0.50 to 10.50 | 16.0 | 80 | ||||||||
16 | 0.50 to 14.50 | 20.0 | 100 |
*Note that the chamfering blade width (CM) may not be available depending on the size.
Maximum chamfering blade width CM (max) = (d − D − tan θ×ℓ× 2) / 2
*Specifyℓso that it meets all the conditions of (1), (2) and (3).
*Depending on the size ofℓ, all slope angles may be the blade length.
Click here for the cutting conditions
MISUMI
Days to Ship :5 Days
MISUMI
Days to Ship :5 Days
MISUMI
Days to Ship :5 Days
MISUMI
Days to Ship :5 Days
MISUMI
Days to Ship :5 Days
MISUMI
Days to Ship :5 Days
MISUMI
Days to Ship :5 Days
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please usethe inquiry form.
Customer Privacy Policy