Two ball shapes to achieve efficient processing
Part Number
Configure to get your Part Number
Part Number |
---|
SBCREM4-[1.36-1.85/0.01]-[2-10/0.5]-[0.1-0.59/0.01] |
SBCREM6-[1.86-2.85/0.01]-[3-12/0.5]-[0.1-1.09/0.01] |
SBCREM8-[2.86-3.85/0.01]-[4-14/0.5]-[0.1-1.09/0.01] |
SBCREM10-[3.86-4.85/0.01]-[5-15/0.5]-[0.1-1.09/0.01] |
SBCREM12-[4.86-5.85/0.01]-[6-15/0.5]-[0.1-1.09/0.01] |
SBCREM16-[5.86-7.85/0.01]-[8-15/0.5]-[0.1-2.09/0.01] |
Loading...
[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.
Model Number | Tip R 0.01 mm Increment Designation |
Flute Length ℓ 0.5 mm Increment Designation |
InnerCurve CR 0.01 mm Increment Designation |
大直徑 D1 |
Outer Diameter D |
Overall Length L |
|
Shank Diameter d |
|||||||
SBCREM | 4 | 1.36 ~ 1.85 | 2.0 ~ 10.0 | 0.10 ≤ CR ≤ (d - D - 0.1) / 2 | 2CR + D + 0.1 | R x 2 | 50 |
6 | 1.86 ~ 2.85 | 3.0 ~ 12.0 | 60 | ||||
8 | 2.86 ~ 3.85 | 4.0 ~ 14.0 | 60 | ||||
10 | 3.86 ~ 4.85 | 5.0 ~ 15.0 | 80 | ||||
12 | 4.86 ~ 5.85 | 6.0 ~ 15.0 | 80 | ||||
16 | 5.86 ~ 7.85 | 8.0 ~ 15.0 | 100 |
For Cutting Conditions, Refer to >>Click here.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please usethe inquiry form.
Customer Privacy Policy