This can be used for horizontal / vertical positioning on high locations.
Part Number
Configure to get your Part Number
Type | Shape Code | Material Code | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness |
SRT | A(Threaded) B(Tapped) |
B | ①1045碳鋼 | Black Oxide | - |
R | ②1045 Carbon Steel | Hard Chrome Plating Plating Thickness: 3µm or more |
Plating Hardness: 750HV~ | ||
HB | ③1045 Carbon Steel | Black Oxide | Treated Hardness: 45~50HRC | ||
HR | ④1045 Carbon Steel | Hard Chrome Plating Plating Thickness: 3µm or more |
Treated Hardness: 45~50HRC Plating Hardness: 750HV~ |
||
SU | ⑤304 Stainless Steel | - | - | ||
C | ⑥440C or 420 Stainless Steel | - | Treated Hardness: 50~55HRC |
Part Number | - | L | - | G | ||||||
Type | Shape | Material | B | |||||||
SRT SRT |
A B |
B SU |
8 12 |
- - |
L20.00 L50.00 |
- |
G6 |
Part Number | L 0.01mm Increment |
G 1mm Increment |
(C) | d | M (Coarse) |
M1(Coarse) | |||
Type | Shape Code | Material Code | B | ||||||
Threaded Type only | |||||||||
SRT | A(Threaded) B(Tapped) |
B R HB HR SU C |
6 | 10.00~50.00 | 0 or 2≤G≤dx2 |
6.9 | 4 | M4 | M3 |
7 | 8.1 | ||||||||
8 | 15.00~50.00 | 9.2 | 5 | M5 | M4 | ||||
10 | 20.0~80.00 | 11.5 | M5 | ||||||
12 | 13.9 | 6 | M6 | ||||||
13 | 15 | M6 | |||||||
14 | 16.2 | ||||||||
17 | 19.6 | 8 | M8 | ||||||
19 | 21.9 | M8 | |||||||
24 | 27.7 | 10 | M10 |
Part Number |
---|
SRTAB6-L[10-50/0.01]-G0 |
SRTAB6-L[10-50/0.01]-G[2-8/1] |
SRTAB7-L[10-50/0.01]-G0 |
SRTAB7-L[10-50/0.01]-G[2-8/1] |
SRTAB8-L[15-50/0.01]-G0 |
SRTAB8-L[15-50/0.01]-G[2-10/1] |
SRTAB10-L[20-80/0.01]-G0 |
SRTAB10-L[20-80/0.01]-G[2-10/1] |
SRTAB12-L[20-80/0.01]-G0 |
SRTAB12-L[20-80/0.01]-G[2-12/1] |
SRTAB13-L[20-80/0.01]-G0 |
SRTAB13-L[20-80/0.01]-G[2-12/1] |
SRTAB14-L[20-80/0.01]-G0 |
SRTAB14-L[20-80/0.01]-G[2-12/1] |
SRTAB17-L[20-80/0.01]-G0 |
SRTAB17-L[20-80/0.01]-G[2-16/1] |
SRTAB19-L[20-80/0.01]-G0 |
SRTAB19-L[20-80/0.01]-G[2-16/1] |
SRTAB24-L[20-80/0.01]-G0 |
SRTAB24-L[20-80/0.01]-G[2-20/1] |
SRTAC8-L[15-50/0.01]-G0 |
SRTAC8-L[15-50/0.01]-G[2-10/1] |
SRTAC10-L[20-80/0.01]-G0 |
SRTAC10-L[20-80/0.01]-G[2-10/1] |
SRTAC12-L[20-80/0.01]-G0 |
SRTAC12-L[20-80/0.01]-G[2-12/1] |
SRTAC13-L[20-80/0.01]-G0 |
SRTAC13-L[20-80/0.01]-G[2-12/1] |
SRTAC14-L[20-80/0.01]-G0 |
SRTAC14-L[20-80/0.01]-G[2-12/1] |
SRTAC17-L[20-80/0.01]-G0 |
SRTAC17-L[20-80/0.01]-G[2-16/1] |
SRTAC19-L[20-80/0.01]-G0 |
SRTAC19-L[20-80/0.01]-G[2-16/1] |
SRTAC24-L[20-80/0.01]-G0 |
SRTAC24-L[20-80/0.01]-G[2-20/1] |
SRTAHB6-L[10-50/0.01]-G0 |
SRTAHB6-L[10-50/0.01]-G[2-8/1] |
SRTAHB7-L[10-50/0.01]-G0 |
SRTAHB7-L[10-50/0.01]-G[2-8/1] |
SRTAHB8-L[15-50/0.01]-G0 |
SRTAHB8-L[15-50/0.01]-G[2-10/1] |
SRTAHB10-L[20-80/0.01]-G0 |
SRTAHB10-L[20-80/0.01]-G[2-10/1] |
SRTAHB12-L[20-80/0.01]-G0 |
SRTAHB12-L[20-80/0.01]-G[2-12/1] |
SRTAHB13-L[20-80/0.01]-G0 |
SRTAHB13-L[20-80/0.01]-G[2-12/1] |
SRTAHB14-L[20-80/0.01]-G0 |
SRTAHB14-L[20-80/0.01]-G[2-12/1] |
SRTAHB17-L[20-80/0.01]-G0 |
SRTAHB17-L[20-80/0.01]-G[2-16/1] |
SRTAHB19-L[20-80/0.01]-G0 |
SRTAHB19-L[20-80/0.01]-G[2-16/1] |
SRTAHB24-L[20-80/0.01]-G0 |
SRTAHB24-L[20-80/0.01]-G[2-20/1] |
SRTAHR6-L[10-50/0.01]-G0 |
SRTAHR6-L[10-50/0.01]-G[2-8/1] |
SRTAHR7-L[10-50/0.01]-G0 |
SRTAHR7-L[10-50/0.01]-G[2-8/1] |
Loading...
Type | Height adjusting pin | Height Tolerance(mm) | 0/+0.05 | Tip Shape | Flat |
---|---|---|---|---|---|
Wrench Flats B(inch) | 1 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
客戶隱私波利奇y
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please usethe inquiry form.
客戶隱私波利奇y