Days to Ship |
|
---|
PCS
Incorporating the latest technology, the PUK U5 offers an easy to use solution for precision mold and die repairs. Utilizing micro TIG technology, the welder produces small, consistent spot welds that penetrate the mold surface. The welded areas are strong and can withstand the pressures and working conditions during the molding process. All heat is concentrated at the spot of the weld thereby eliminating the possibility of distortion and metal stress caused by overheating. Backed by a three year manufacturer's warranty.
Configure Now
Ships as soon as | 1 Day |
---|
Configure Now
Ships as soon as | 5 Days |
---|
High-Temperature Lubricating Grease (MISUMI)
MISUMI
■ Features
Long life type
・ A lubricating grease that uses polyol ester synthetic oil with excellent heat resistance as the base oil and fine powder PTFE resin as the thickener.
・ Just one application exhibits high lubrication performance over a long period of time.
・ Exhibits excellent startability and lubricity even at temperatures as low as -20°C.
・ Can be used as a substitute for heat-resistant fluorine grease.
・ Minimal scattering enables use in places where contamination must be avoided.
High heat resistance type
・ A lubricating grease for high temperatures that uses silicone oil with excellent heat
resistance as the base oil and fine powder PTFE resin as the thickener.
・ Excellent heat resistance and lubricity compared to general silicone grease,
making it suitable for lubrication on high temperature bearings and slide surfaces.
Configure Now
Ships as soon as | 7 Days |
---|
MISUMI
■ Features
・ The 120° angle makes it easy to work on corners. It is small, lightweight and high speed, improving work efficiency.
Configure Now
Ships as soon as | 5 Days |
---|
Rubber Grindstone for Mold with Abrasive Grain - Daitec (MISUMI)【10 Pieces Per Package】
MISUMI
【Use】
・Maintenance of mold (baking removal, removal of deposit, leveling of rough mold surface, chamfering after processing of electrodeposited diamond etc) removal of processing point after end milling, removal of rust, relatively small burr Take
【Features】
・Made in Japan. 。
這是一個多功能的使用composi砂輪te abrasive grains (granular grinding stone) and can be used for both cutting and polishing regardless of the target. It is mainly attached to an electric tool and used. We specialize in grinding and polishing (grind while shaving) relatively soft iron-based materials such as soft iron and 303 stainless steel, hard aluminum materials such as 2017 and 7075, and non-ferrous metals.
・ Abrasive grains are included and the grinding ability is very excellent.
・Effective for hard materials such as heat treated materials and hardened materials.
・You can choose from 5 types of particle size # 80, 120, 180, 220 and 320.
・ Color varies depending on particle size.
・We can choose from six kinds of grinding wheel diameter Φ 4, 6, 8, 10, 13, 15.
All axes are φ3, 30 mm in length.
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 5 Days |
---|
Pipe Electrode - Copper/Brass (MISUMI)【20 Pieces Per Package】
MISUMI
[Features]
-A pipe electrode with excellent cost performance, use for electrical discharge machining.
Configure Now
Ships as soon as | 5 Days |
---|
Diamond File - M-PF Series (MISUMI)
MISUMI
[Use]
-A diamond file that is most suitable for mold modification and finishing.
Configure Now
Ships as soon as | 5 Days |
---|
Diamond Taper File - M-CF Series (MISUMI)
MISUMI
[Applications]
-A diamond taper file that is ideal for mold correction and finishing.
Configure Now
Ships as soon as | 5 Days |
---|
Diamond File - M-PFL Series (MISUMI)
MISUMI
[Use]
-A diamond file that is most suitable for mold modification and finishing.
Configure Now
Ships as soon as | 5 Days |
---|
Diamond Inter Set - 30 Piece Set (MISUMI)
MISUMI
[Features]
Recommended for rough machining, small diameter hole machining, grinding finish machining of dies and jigs, deburring! It is a set of 30.
Configure Now
Ships as soon as | 5 Days |
---|
High Durability Rubber Grindstone for Polishing (MISUMI)【10 Pieces Per Package】
MISUMI
■ Features
・ Highly durable, it undergoes very little deformation or wear.
・ A rubber grindstone for polishing that uses high-durability, low-friction rubberand powder abrasive.
■ Supported materials
・ Alloys of iron, aluminum, nickel, zinc, titanium, copper, etc.
■ Limit operational rotational speed
・ 30000 rpm
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
■ Features
・ A top quality grease which is safe to use for a longer period of time as compared to ordinary grease,
without causing any performance degradation under any severe chemical and physical conditions.
・ A grease that cause little deterioration on metals and plastics.
・ Can be used on any material such as resin, metal or rubber.
Configure Now
Ships as soon as | 5 Days |
---|
Horse Hair Brush (MISUMI)【10 Pieces Per Package】
MISUMI
■ Features
・ A soft horse hair brush unlikely to damage the workpiece.
Configure Now
Ships as soon as | 5 Days |
---|
Diamond File - M-PTF Series (MISUMI)
MISUMI
[Use]
-A diamond file that is most suitable for mold modification and finishing.
Configure Now
Ships as soon as | 5 Days |
---|
Deburring Carbide Rotary Bar (MISUMI)
MISUMI
■ For inner and outer surface - Deburring and Chamfering
・ Different blades are provided on the top and bottom, allowing deburring and chamfering on inner and outer surfaces without changing the direction of the workpiece.
・ The central dent can be used for machining along the workpiece.
■ For inner and outer surfaces - Chamfering
・ Different blades are used on the top and bottom of the special pointed flame-shape, inner and outer chamfering can be performed without changing the direction of the workpiece.
・ The central dent can be used to enable machining along the workpiece.
■ Flexible chamfering
・ Various irregular shapes are available.
・ Various machining is possible depending on how the blade is used against the workpiece.
■ For R corner rounding
・ An R-shape blade is attached to the tip of the cylinder.
・ Ideal for finishing corners.
Configure Now
Ships as soon as | 5 Days |
---|
High Heat Resistance Grease for Mold (MISUMI)
MISUMI
■ Features
・ Special synthetic oil blended with a large amount of white solid lubricant.
With excellent lubricating and mold releasing properties in high-temperature areas, it is ideal
for lubricating engineering plastic molds with high molding temperatures.
・ The base oil evaporates gradually over 180°C, forming a dry, friction-resistant film.
Recommended for use in environments exceeding 180°C, as the film formed lubricates in
conditions of mixed friction and boundary friction.
■ Application
・ Lubrication on molds using engineering plastics with high molding temperatures.
・ Lubrication on extrusion pins and other movable parts of die casting machines.
・ Lubrication on low-speed bearings, bolts, hinges, slipper pads, slide rails such as firing,
drying, and quenching equipment.
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
【Features】
・High-speed specification with a maximum rotation speed of 70,000 rpm.
・Collet diameter is 3 mm.
・旋轉速度可以調節通過調節the air flow rate at hand.
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
■ Features
・ Uniform particle size of resin has excellent ion exchange capacity and stable electric resistance.
・ Excellent abrasion resistance for water flow and can be used for a long period of time.
・ Use for general purpose.
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
■ Features
・ This product enables curling wire to be used like a straight rod.
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 7 Days |
---|
Reversible Countersink (MISUMI)
MISUMI
■ Application
・ Use for deburring the inner and outer surface of small holes.
■ How to Use
・ Press the button at the top to turn the blade sideways.
・ Hold the handle, press the button, insert into the hole you want to deburr and rotate it manually by hand. Release the button to perform back chamfering.
・ Turning the button on/off only enables lateral and back chamfering. For front chamfering, rotate the blade with tweezers or a tool instead of by hand.
Configure Now
Ships as soon as | 5 Days |
---|
Grind Stone for Mold (MISUMI)【10 Pieces Per Package】
MISUMI
■ Features
A best-selling grindstone that boasts a long track record and tradition and continue support as a polishing grindstone for molds.
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
■ Features
・ Washes abrasive dust and loose abrasive grains off oilstones to prevent scratches.
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 5 Days |
---|
Diamond Inter Set - 20 Piece Set (MISUMI)
MISUMI
[Features]
Recommended for rough machining, small diameter hole machining, grinding finish machining of dies and jigs, deburring! It is a set of 20.
Configure Now
Ships as soon as | 5 Days |
---|
Rubber Grindstone for Mold with Abrasive Grain - Diamond Daitec (MISUMI)
MISUMI
【Use】
・We can use for mold maintenance.
【Features】
・Made in Japan.
・Abrasive grains are included and the grinding ability is very excellent.
・Effective for hard materials such as heat treated materials and hardened materials.
・Color varies depending on particle size
・You can choose from 3 types of particle size # 320, 600 and 1,000.
・ We can choose from four kinds of grinding wheel diameter Φ4, 6, 8, 10.
・All axes are Φ3 and 30 mm in length.
Configure Now
Ships as soon as | 5 Days |
---|
Amplex Oil-Based Diamond Paste - Low Odor (MISUMI)
MISUMI
【Specifications ・ Overview】
・Used for polishing of molds. It is widely used because of its excellent polishing ability and many types of particle size.
・Sharpness is better in the order of medium, standard and heavy.
【Features】
・A special tube is included so that expensive diamonds can be used efficiently. You can always use it in appropriate amount.
Configure Now
Ships as soon as | 5 Days |
---|
Mold Polishing Cloth (MISUMI)【10 Pieces Per Package】
MISUMI
【Features】
・The combined effect of "ultrafine particle abrasive" and "gloss out agent" produces gloss.
・ It is a dry type that leaves no dirt or stains on goods.
・Both sides can be used. You can cut it into a suitable size and use it.
Configure Now
Ships as soon as | 4 Days |
---|
Guide Scriber - FGSCB Series (MISUMI)
MISUMI
[Features]
Milling work, speeding up without the need for scribing on the surface plate. Scribing with high efficiency and accuracy is possible.
Configure Now
Ships as soon as | 5 Days |
---|
Wobble Prevention Jig (MISUMI)
MISUMI
■ Features
・ Holding the handle of the jig, helps to prevent the hand from wobbling, reduce unnecessary force and reduce work fatigue.
・ It has a magnet stand to allow easy fixing to the table.
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
■ Application : Usable with an abrasive for mirror finishing.
■ Features
・ Use with Amplex Diamond Paste (P.431) for mirror finishing.
・ Can be cut to the desired sizes and shapes.
・ Available in two types: hard and soft.
Configure Now
Ships as soon as | 5 Days |
---|
Pig Hair Brush (MISUMI)【10 Pieces Per Package】
MISUMI
■ Features
・ A brush that can be used for various applications.
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
■ Application・ Use for polishing the edge of high-speed steel (HSS) and carbide tools, and use for correcting and finishing dies.
Configure Now
Ships as soon as | 5 Days |
---|
Diamond Abrasive Paper (MISUMI)
MISUMI
■ Application
・ Use for mirror finishing of molds and difficult-to-cut materials.
■ Features
・ Water and grinding fluid can be used. The back has adhesive.
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 5 Days |
---|
Air Micro Grinder - 3mm or 6mm Collet (MISUMI)
MISUMI
■ Features
・ Can be used for both 3 mm shaft and 6 mm shaft with various grindstones.
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
■ Features
・ Both flat and curved machining surfaces are supported.
・ Usable to deburr holes from the front and back.
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 1 Day |
---|
MISUMI
【Use】
・We can use for mold maintenance.
【Features】
・Made in Japan
A high speed rotation rubber stone that is adjusted to be usable with an air turbine etc. while maintaining the usability of the DF series ・ The grinding performance is extremely excellent with abrasive grains included.
・Effective for hard materials such as heat treated materials and hardened materials.
・It is a high speed specification of allowable rotation speed 60,000 rpm.
・You can choose from 4 types of particle size # 80, 120, 180 and 220.
・We can choose from four kinds of grinding wheel diameter Φ4, 6, 8, 10.
・Color varies depending on particle size.
・All axes are Φ3 and 30 mm in length.
Configure Now
Ships as soon as | 5 Days |
---|
Water Resistant Paper (MISUMI)【16-50 Pieces Per Package】
MISUMI
【Specifications / Overview】
・Dry or wet can be used.
・Uses extremely hard and sharp abrasive grains, and the abrasive grains are self-made for long-lasting polishing.
【Features】
・因為的磨粒ns remain in the folds, it is excellent in polishing power.
・It can also be used in processes that are only permitted to use silicon carbide abrasives, such as in the aviation industry.
・We also prepare samples (M-PFE-SP) containing 2 pieces of each particle size.
Configure Now
Ships as soon as | 5 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brand | PCS |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
MISUMI |
PCS |
MISUMI |
MISUMI |
Product Series | Rubber Grindstone for Mold with Abrasive Grain - Daitec (MISUMI)【10 Pieces Per Package】 |
Pipe Electrode - Copper/Brass (MISUMI)【20 Pieces Per Package】 |
High Durability Rubber Grindstone for Polishing (MISUMI)【10 Pieces Per Package】 |
Rubber Grindstone for Mold with Abrasive Grain - Diamond Daitec (MISUMI) |
|||||||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship | 1 Day | 5 Days | 7 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 7 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 4 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 1 Day | 5 Days | 5 Days |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please usethe inquiry form.
Customer Privacy Policy