Days to Ship |
|
---|
Sandvik Corothread 266小車床螺紋切割柄位(Sandvik)
SANDVIK
[Features]
·帶有極高剛性的穿線柄位。
· iLock interface suppresses tip movement while machining threads, guarantees tip stability and accuracy, and achieves an excellent finished surface and repeatability.
[申請]
· For outer diameter threading.
· Especially for small lathes.
Configure Now
Ships as soon as | 7 Days |
---|
HY-PRO Planet Cutter Single Point Holder (Cylindrical Shank) TM-SC-C (OSG)
OSG
[規格]
· Shape: Thread cutting holder
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 9 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Small Bore Threaded, EZ Bar, EZT Model (KYOCERA)
KYOCERA
• Preferred Hand: Right Handed
• rε: 0.02±0.01
• Material: PR1225
• φd (mm): 2.5
•φA:3.0
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 23天 |
---|
HSS Outer Threading Holder (SANWASEISAKUSYO)
Sanwaseisakusyo
•使用:外徑線
•總長度(mm):120
• JAN Code: 4580130747601
• Height (mm): 25
•Trusco代碼:411-0901
Configure Now
Ships as soon as | 4 Days |
---|
SEC-Threading Bit, STHI Type (SUMITOMO ELEC)
SUMITOMO ELEC
Supports small diameters (inner diameters from ø8 mm), and small pitches (0.4-1.0 mm). Ideal for machining small objects.
Configure Now
Ships as soon as | 9 Days |
---|
SUMITOMO ELEC
For compact lathes with shank □20 mm square or less. It also supports space-saving threading with a 2-corner insert used vertically.
Configure Now
Ships as soon as | 8 Days |
---|
SEC-Threading Bit, THI Type (SUMITOMO ELEC)
SUMITOMO ELEC
Excellent sharpness with G-grade corner insert
Configure Now
Ships as soon as | 9 Days |
---|
SEC-Threading Bit, Nejikiri-Kun, LTE Type (SUMITOMO ELEC)
SUMITOMO ELEC
Lineup of strong clamp lever lock holder (shank □25-32 mm square) and screw-on specifications (shank □12-16 mm square)
Configure Now
Ships as soon as | 4 Days |
---|
SEC-Threading Bit, Nejikiri-Kun, STE Type (SUMITOMO ELEC)
SUMITOMO ELEC
Lineup of strong clamp lever lock holder (shank □25-32 mm square) and screw-on specifications (shank □12-16 mm square)
Configure Now
Ships as soon as | 9 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
SEC-Threading Bit for Outer Diameter, THE Type (SUMITOMO ELEC)
SUMITOMO ELEC
Firm Retractable Pin Specification
Configure Now
Ships as soon as | 4 Days |
---|
Outer Diameter Holder KTNS Type (KYOCERA)
KYOCERA
• Preferred Hand: Right Handed
• Dimension H3 (mm): 8.5
• Sheet: FT-15
• Clamp Set: CPS-5S
• Clamp Screw: SB-3.5TR
Configure Now
Ships as soon as | 4 Days |
---|
Outer Diameter Holder KTN Type (KYOCERA)
KYOCERA
• Preferred Hand: Left Handed
• Dimension H3 (mm): 8.5
• Dimension L2 (mm): 25
• Sheet: FT-15
• Clamp Set: CPS-5S
Configure Now
Ships as soon as | 4 Days |
---|
穿線TKFT係列,KTKF型/ ktkf型空間架(kyocera)
KYOCERA
• Dimension L2 (mm): 15
• Dimension T (mm): 6
• Wrench: LTW-10S
• Clamp Screw: SB-4590TRWN
Configure Now
Ships as soon as | 4 Days |
---|
外徑螺紋ing Tool Holder [for TTX Chip] KTTX Type (KYOCERA)
KYOCERA
• Preferred Hand: Right Handed
• Dimension H2 (mm): 2
• Dimension H3 (mm): 2.5
• Dimension L2 (mm): 17.6
• Wrench: FT-8
Configure Now
Ships as soon as | 4 Days |
---|
外徑螺紋ing Tool Holder [for TTX Chip] S...KTTX Type (Outer Diameter Sleeve Holder) (KYOCERA)
KYOCERA
• Preferred Hand: Left Handed
• Wrench: FT-8
•夾緊螺釘:SB-4070TRW
Configure Now
Ships as soon as | 5 Days |
---|
VNT Type (System Bar) (KYOCERA)
KYOCERA
• Preferred Hand: Right Handed
• rε: 0.05+0/-0.02
• Dimension H (mm): 3.9
•尺寸L1(mm):30.8
• Dimension L2 (mm): 11
Configure Now
Ships as soon as | 4 Days |
---|
KYOCERA
•尺寸L3(mm):5.5
• Screw: SB-3STR
• Wrench: FT-10
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 7 Days |
---|
Configure Now
Ships as soon as | 7 Days |
---|
HY-PRO Planet Cutter TMLC Holder (1 Flute / Long Type) TMLC (OSG)
OSG
[規格]
· Shape: Thread cutting holder
· Handedness: Right Handed
Configure Now
Ships as soon as | 4 Days |
---|
HY-PRO Planet Cutter TM2C Holders (2 Flute / High Efficiency Type) TM2C (OSG)
OSG
[規格]
· Shape: Thread cutting holder
Configure Now
Ships as soon as | 4 Days |
---|
HY-PRO Planet Cutter TMNC HOLDER (for 1 Flute / Pipe Taper Thread) TMNC (OSG)
OSG
[規格]
· Shape: Thread cutting holder
Configure Now
Ships as soon as | 4 Days |
---|
HY-PRO Planet Cutter Shell Type TMSH (OSG)
OSG
• Dimension L1 (mm): 12.5
• Includes Oil Hole: Available
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Sandvik T-Max U-Lock Thread-Cutting Boring Bit (SANDVIK)
SANDVIK
[Features]
·內徑螺紋具有高剛性的鑽孔。
[申請]
·用於內部線程。
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
Days to Ship |
Use |
Thread Model |
瀝青(mm) |
Minimum Processing Diameter(mm) |
Preferred Hand |
鏈接大小 |
Cutting Oil Hole Presence |
刮水器葉片存在 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brand | SANDVIK |
OSG |
KYOCERA |
SUMITOMO ELEC |
KYOCERA |
KYOCERA |
KYOCERA |
SANDVIK |
Sanwaseisakusyo |
SUMITOMO ELEC |
SUMITOMO ELEC |
SUMITOMO ELEC |
SUMITOMO ELEC |
SUMITOMO ELEC |
SUMITOMO ELEC |
SUMITOMO ELEC |
KYOCERA |
KYOCERA |
KYOCERA |
KYOCERA |
KYOCERA |
KYOCERA |
KYOCERA |
SANDVIK |
SANDVIK |
SANDVIK |
SANDVIK |
OSG |
OSG |
OSG |
OSG |
OSG |
SANDVIK |
Product Series | HY-PRO Planet Cutter Single Point Holder (Cylindrical Shank) TM-SC-C (OSG) |
Threading, Inner Diameter Holder SIN Type / CIN Type (KYOCERA) |
SEC-Threading Bit for Outer Diameter, THE Type (SUMITOMO ELEC) |
外徑螺紋ing Tool Holder [for TTX Chip] S...KTTX Type (Outer Diameter Sleeve Holder) (KYOCERA) |
HY-PRO Planet Cutter TMLC Holder (1 Flute / Long Type) TMLC (OSG) |
HY-PRO Planet Cutter TM2C Holders (2 Flute / High Efficiency Type) TM2C (OSG) |
HY-PRO Planet Cutter TMNC HOLDER (for 1 Flute / Pipe Taper Thread) TMNC (OSG) |
||||||||||||||||||||||||||
Days to Ship | 7 Days | 4 Days | 4 Days | 9 Days | 4 Days | 4 Days | 4 Days | 23天 | 4 Days | 9 Days | 8 Days | 9 Days | 4 Days | 9 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 7 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Use | 外徑螺紋 | - | - | 外徑螺紋 | - | - | - | 外徑螺紋 | 外徑螺紋 | Inner Diameter Thread | 外徑螺紋 | Inner Diameter Thread | 外徑螺紋 | 外徑螺紋 | Inner Diameter Thread | 外徑螺紋 | - | - | - | - | - | - | - | Inner Diameter Thread | 外徑螺紋 | Inner Diameter Thread | Inner Diameter Thread | - | - | - | - | - | Inner Diameter Thread |
Thread Model | - | 60 Degrees Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) | - | 60度計(M) / 55°智慧(W) /錐度55°Pipe Rc(PT) (BSPT) | - | - | - | 60 Degrees Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55° Wit (W) / American Pipe Taper (NPT) | - | 60 Degrees Meter (M) | 60度儀表(m)/ 55°機智(w) | 60 Degrees Meter (M) | 60 Degrees Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55° Wit (W) / Taper for 55° Pipe Rc(PT) (BSPT) | 60 Degrees Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55° Wit (W) / Taper for 55° Pipe Rc(PT) (BSPT) | 60度儀表(m)/ 55°機智(w) | 60度計(M) / 55°智慧(W) /錐度55°Pipe Rc(PT) (BSPT) | - | - | - | - | - | - | - | 60 Degrees Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55° Wit (W) / American Pipe Taper (NPT) | 60 Degrees Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55° Wit (W) / American Pipe Taper (NPT) | 60 Degrees Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55° Wit (W) / American Pipe Taper (NPT) | 60 Degrees Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55° Wit (W) / American Pipe Taper (NPT) | - | - | - | - | - | - |
瀝青(mm) | - | - | - | 0.80~3.00 | - | - | - | - | - | 0.40~1.00 | 0.20~1.50 | 0.40~1.00 | 1.00~3.00 | 1.00~3.00 | 1.00~3.00 | 0.80~3.00 | - | - | - | - | - | - | - | 0.5-2.0 | 0.5-3.0 | - | 0.5-3.0 ~ 2.5-7.0 | - | - | - | - | - | - |
Minimum Processing Diameter(mm) | - | - | - | - | - | - | - | - | - | 8 ~ 12 | - | 18 ~ 27 | - | - | 20 ~ 25 | - | - | - | - | - | - | - | - | 12〜16 | - | 25〜63 | 32 ~ 50 | - | - | - | - | - | - |
Preferred Hand | - | - | Right Handed | Right Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed | Left Handed | - | - | Right Handed / Left Handed | Right Handed | Right Handed | Right Handed | Right Handed | Right Handed | Right Handed | Left Handed | Right Handed / Left Handed | Right Handed | Left Handed | Right Handed | Right Handed / Left Handed | Right Handed | Left Handed | Right Handed / Left Handed | Right Handed / Left Handed | Right Handed | Right Handed | Right Handed / Left Handed | - | Right Handed / Left Handed | - |
鏈接大小 | - | - | - | 10-sided / 12-sided | - | - | - | 10-sided | - | - | 10側/ 12側/ 16麵/ 20麵 | φ16/φ20/ φ25 | 20麵/ 25麵/ φ32 | 12-sided / 16-sided | φ16/φ20 | 20麵/ 25麵 | - | - | - | - | - | - | - | φ16 | 16-sided / 25-sided | φ20 / φ25 / φ32 / φ40 | φ25 / φ32 / φ40 | - | - | - | - | - | - |
Cutting Oil Hole Presence | - | Included | - | - | - | - | - | 沒有 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Included | 沒有 | 包括/沒有 | 沒有 | - | - | - | - | - | - |
刮水器葉片存在 | - | - | - | Both Available and Unavailable | - | - | - | 沒有 | - | 沒有 | 沒有 | Both Available and Unavailable | Both Available and Unavailable | Both Available and Unavailable | Both Available and Unavailable | Both Available and Unavailable | - | - | - | - | - | - | - | 沒有 | 沒有 | 沒有 | 沒有 | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
謝謝您的合作。
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please usethe inquiry form.
Customer Privacy Policy