MenuClose
Gas Release Straight Ejector Pins
| Days to Ship |
|
|---|
-
Gas Release Straight Ejector Pins - High Speed Steel SKH51, Configurable Shaft Diameter (MISUMI)
MISUMI
• Shape Type: Gas release
• Material: SKH51
• L Dimension Tolerance Reference: +0.02/0 or +0.05/0
• Gas Release Shape: With gas vent- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
MISUMI
• Shape Type: Gas release
• Material: SKH51- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Ejector Pin with Gas Release Filter
MISUMI
[Standard added]
Shaft diameter Φ3.5mm size added! (Not in PDF catalog)
[Features]
An ejector pin with a gas vent filter pressed into the pin tip.
The gas in the mold escapes from the ventilation groove of the filter section.
Ventilation grooves are concentrically arranged, so gas from any direction can easily escape, and the influence of pin orientation during installation on molding defects can be reduced.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
MISUMI
• Shape Type: Gas release
• Material: SKH51
• L Dimension Tolerance Reference: +0.02/0 or +0.05/0
• Gas Release Shape: With gas vent- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Shape type |
| Material |
| Shaft diameter tolerance (Reference tolerance) |
| L dimension tolerance (Reference tolerance) |
| Surface treatment |
| Head thickness |
| D/P (Shaft diameter)(mm) |
| Tip shape |
| Gas release shape |
| Character engraving type |
| Number of engraving characters |
|
|
|
|
|
|
| Brand | MISUMI |
MISUMI |
MISUMI |
MISUMI |
| Product Series | Gas Release Straight Ejector Pins - High Speed Steel SKH51, Configurable Shaft Diameter (MISUMI) |
|||
| CAD |
|
|
|
|
| Days to Ship | 5 Days | 5 Days | 7 Days | 5 Days |
| Shape type | Gas release | Gas release | Gas release | Gas release |
| Material | SKH51 | SKH51 | SKH51 | SKH51 |
| Shaft diameter tolerance (Reference tolerance) | -0.01/-0.02 / 0/-0.005 | -0.01/-0.02 / 0/-0.005 | -0.01/-0.02 | -0.01/-0.02 / 0/-0.005 |
| L dimension tolerance (Reference tolerance) | +0.02/0 or +0.05/0 | +0.02/0 / +0.02/0 or +0.05/0 | +0.02/0 | +0.02/0 or +0.05/0 |
| Surface treatment | No | No | No | No |
| Head thickness | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) |
| D/P (Shaft diameter)(mm) | 2 ～ 12 | 0.6 ～ 12 | 3.5 ～ 6 | 2 ～ 12 |
| Tip shape | No | No | - | No |
| Gas release shape | With gas vent | Single flat cutting / Four flats cutting | - | With gas vent |
| Character engraving type | No | No | - | No |
| Number of engraving characters | No | No | - | No |
Loading...
Configure
Filters
Shape type
Material
Shaft diameter tolerance (Reference tolerance)
L dimension tolerance (Reference tolerance)
Surface treatment
- No
Head thickness
Metric / Inch
D/P (Shaft diameter)(mm)
Tip shape
Gas release shape
Character engraving type
- No
Number of engraving characters
- No
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please usethe inquiry form.
Customer Privacy Policy