Days to Ship |
|
---|
配置Now
Ships as soon as | 4 Days |
---|
Noga Japan
For complete product overview and details on Carmex Thread Cutting Tip (TRAPEZ / for Trapezoidal Screw), see the sections below:
配置Now
Ships as soon as | 4 Days |
---|
CNMG120408-MTM20 Lathe Insert (MISUMI)
MISUMI
General purpose turning insert ideal for steel, cast iron, stainless steel, and difficult-to-cut materials
配置Now
Ships as soon as | 4 Days |
---|
配置Now
Ships as soon as | 9 Days |
---|
Sandvik Corothread 266螺紋切削尖(Sandvik)
SANDVIK
[特征]
· CoroThread 266, Thread Cutting Tip
·塗層硬質合金尖端。
· New concept tip achieves simple installation and has a high clamp rigidity guide rail
[Applications]
· For outer diameter threading
·對於粉底55°螺釘
· Processing Pitch: for 26-Thread
配置Now
Ships as soon as | 4 Days |
---|
SNMG120408-MTM20 Lathe Insert (MISUMI)
MISUMI
General purpose turning insert ideal for steel, cast iron, stainless steel, and difficult-to-cut materials
配置Now
Ships as soon as | 4 Days |
---|
TNMG160408-MTM20 Lathe Insert (MISUMI)
MISUMI
General purpose turning insert ideal for steel, cast iron, stainless steel, and difficult-to-cut materials
配置Now
Ships as soon as | 4 Days |
---|
配置Now
Ships as soon as | 4 Days |
---|
配置Now
Ships as soon as | 8天 |
---|
配置Now
Ships as soon as | 8天 |
---|
配置Now
Ships as soon as | 4 Days |
---|
Sumi Boron Chip CGAR (SUMITOMO ELEC)
Sumitomo Elec.
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
配置Now
Ships as soon as | 8天 |
---|
80° Diamond-Shape With Hole, Negative, CNMG-UG, For Medium Cutting (SUMITOMO ELEC)
Sumitomo Elec.
[特征]
· A best-selling, versatile breaker.
配置Now
Ships as soon as | 4 Days |
---|
葉片代表lacement Insert D (55° Rhombic) DNMG-N-FL (SUMITOMO ELEC)
Sumitomo Elec.
•Shape : D (55° Diamond)
•使用:外徑/內徑
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•耙角:負麵
•Preferred Hand : No Preferred Hand
For complete product overview and details on Blade Replacement Insert D (55° Rhombic) DNMG-N-FL, see the sections below:
配置Now
Ships as soon as | 8天 |
---|
Square-Shape With Hole, Negative, SNMG-GU, For Medium Cutting (SUMITOMO ELEC)
Sumitomo Elec.
[特征]
· Wear-resistant, general-purpose breaker with low resistance.
配置Now
Ships as soon as | 4 Days |
---|
Triangle-Shape With Hole, Positive 7°, TCMT-LU, For Finish Cutting (SUMITOMO ELEC)
Sumitomo Elec.
[特征]
· Breaker for finishing with significantly improved chip control during detailed cutting.
配置Now
Ships as soon as | 8天 |
---|
Triangle-Shape With Hole, Negative, TNMG-SX, For Light - Medium Cutting (SUMITOMO ELEC)
Sumitomo Elec.
[特征]
·斷路器能夠分析和步進銑削。
配置Now
Ships as soon as | 8天 |
---|
Sumi Boron Chip T (Triangle) TPGW (SUMITOMO ELEC)
Sumitomo Elec.
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
配置Now
Ships as soon as | 4 Days |
---|
CERATIZIT HyperCoat Chip (OSG)
OSG
[Specifications]
· Shape: Insert (for turning)
· Work Material: Steel, Stainless Steel, Cast Iron
[申請]轉動
配置Now
Ships as soon as | 4 Days |
---|
kyocera.
•形狀:T(三角形)
•使用:外徑/內徑
•工作材料:耐熱合金,鈦合金,不鏽鋼
•Breaker Application : Medium - Heavy Cutting
•耙角:負麵
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG1604○○MS Medium to Rough Stainless Steel Heat-Resistant Alloy, see the sections below:
配置Now
Ships as soon as | 4 Days |
---|
60° Triangle Negative with Hole TNGG16○○-C "Medium - Rough" (KYOCERA)
kyocera.
•形狀:T(三角形)
•使用:外徑/內徑
•工作材料:鑄鐵,耐熱合金,鈦合金,有色金屬,不鏽鋼,鋼
•Breaker Application : Heavy Cutting
•耙角:負麵
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-C Medium to Rough, see the sections below:
配置Now
Ships as soon as | 4 Days |
---|
Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting" (KYOCERA)
kyocera.
•Shape : D (55° Diamond)
•使用:外徑/內徑
•工作材料:鑄鐵,不鏽鋼,鋼
•Breaker Application : Medium Cutting
•耙角:正麵
•Preferred Hand : No Preferred Hand
•鼻子R:0.2,0.4,其他
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCGT for Intermediate Cutting, see the sections below:
配置Now
Ships as soon as | 4 Days |
---|
Tip for Lathe, CBN Diamond, Positive CCMT (KYOCERA)
kyocera.
•Shape : C (80° Diamond)
•使用:外徑/內徑
•工作材料:耐熱合金,鈦合金,有色金屬
•耙角:正麵
•Preferred Hand : No Preferred Hand
•鼻子R:0.2,0.4,0.8,其他
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive CCMT, see the sections below:
配置Now
Ships as soon as | 4 Days |
---|
Kyocera Turning Insert PV720 PVD Cermet (KYOCERA)
kyocera.
•斷路器應用:完成,輕切割
有關Kyocera轉動插入PV720 PVD Cermet的完整產品概述和詳細信息,請參閱以下部分:
配置Now
Ships as soon as | 4 Days |
---|
VNMG160408-MTM20 Lathe Insert (MISUMI)
MISUMI
General purpose turning insert ideal for steel, cast iron, stainless steel, difficult-to-cut materials
配置Now
Ships as soon as | 4 Days |
---|
TUNGALOY
•Shape : Others
•使用:外徑/內徑
•工作材料:鑄鐵,不鏽鋼,鋼
•耙角:正麵
•Preferred Hand : No Preferred Hand
For complete product overview and details on Diamond Shape with Hole 25° Positive 7°, see the sections below:
配置Now
Ships as soon as | 4 Days |
---|
配置Now
Ships as soon as | 4 Days |
---|
配置Now
Ships as soon as | 9 Days |
---|
配置Now
Ships as soon as | 9 Days |
---|
Sumi Boron Chip V (35° Rhombus) 2NU-VNGA (SUMITOMO ELEC)
Sumitomo Elec.
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
配置Now
Ships as soon as | 8天 |
---|
Sumi Boron Chip T (Triangle) 3NC-TPGW (SUMITOMO ELEC)
Sumitomo Elec.
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
配置Now
Ships as soon as | 8天 |
---|
配置Now
Ships as soon as | 4 Days |
---|
配置Now
Ships as soon as | 8天 |
---|
Sumi Boron Chip C (80° Rhombus) NU-CCGW (SUMITOMO ELEC)
Sumitomo Elec.
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
配置Now
Ships as soon as | 8天 |
---|
Sumi Boron Chip T (Triangle) NU-TPGW (SUMITOMO ELEC)
Sumitomo Elec.
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
配置Now
Ships as soon as | 4 Days |
---|
Sumi Boron Chip D (55° Rhombus) T-2NU-DNGA (SUMITOMO ELEC)
Sumitomo Elec.
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
配置Now
Ships as soon as | 8天 |
---|
Tip (SEC-SFT Type) (SUMITOMO ELEC)
Sumitomo Elec.
Lineups include various cutting edge replaceable tool inserts.
配置Now
Ships as soon as | 9 Days |
---|
配置Now
Ships as soon as | 9 Days |
---|
Sumitomo Elec.
An insert for a variety of replaceable tool bits.
配置Now
Ships as soon as | 4 Days |
---|
Tip (Sumi Boron Boring Tool) (SUMITOMO ELEC)
Sumitomo Elec.
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
配置Now
Ships as soon as | 8天 |
---|
提示(Sumi Boron Croving Tool BNGG型)(Sumitomo Elec)
Sumitomo Elec.
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
配置Now
Ships as soon as | 8天 |
---|
配置Now
Ships as soon as | 4 Days |
---|
配置Now
Ships as soon as | 9 Days |
---|
配置Now
Ships as soon as | 9 Days |
---|
Replacement Blade Insert C (80° Diamond) CCGT-L-FX (SUMITOMO ELEC)
Sumitomo Elec.
A diamond-shaped insert.
配置Now
Ships as soon as | 8天 |
---|
Brand |
---|
產品係列 |
Days to Ship |
Shape |
采用 |
可用角數 |
工作材料 |
Breaker Application |
Rake Angle |
Preferred Hand |
Nose R |
Outer Diameter / Inner Diameter (For Tapping) |
凹槽寬度(用於開槽/分開) |
線程類型(用於點擊) |
牙齒數量(用於點擊) |
Pitch (For Tapping) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brand | Sumitomo Elec. |
Noga Japan |
MISUMI |
Sumitomo Elec. |
SANDVIK |
MISUMI |
MISUMI |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
OSG |
kyocera. |
kyocera. |
kyocera. |
kyocera. |
kyocera. |
MISUMI |
TUNGALOY |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
Sumitomo Elec. |
產品係列 | Tip (Square Groove Grooving Tip TGA Type) TGAR (SUMITOMO ELEC) |
80° Diamond-Shape With Hole, Negative, CNMG-UG, For Medium Cutting (SUMITOMO ELEC) |
葉片代表lacement Insert D (55° Rhombic) DNMG-N-FL (SUMITOMO ELEC) |
Square-Shape With Hole, Negative, SNMG-GU, For Medium Cutting (SUMITOMO ELEC) |
Triangle-Shape With Hole, Positive 7°, TCMT-LU, For Finish Cutting (SUMITOMO ELEC) |
Triangle-Shape With Hole, Negative, TNMG-SX, For Light - Medium Cutting (SUMITOMO ELEC) |
60° Triangle Negative with Hole TNGG16○○-C "Medium - Rough" (KYOCERA) |
Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting" (KYOCERA) |
Tip (Square Groove Grooving Tip TGA Type) TGARE (SUMITOMO ELEC) |
Replacement Blade Insert C (80° Diamond) CCGT-L-FX (SUMITOMO ELEC) |
|||||||||||||||||||||||||||||||||||
Days to Ship | 4 Days | 4 Days | 4 Days | 9 Days | 4 Days | 4 Days | 4 Days | 4 Days | 8天 | 8天 | 4 Days | 8天 | 4 Days | 8天 | 4 Days | 8天 | 8天 | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 9 Days | 9 Days | 8天 | 8天 | 4 Days | 8天 | 8天 | 4 Days | 8天 | 9 Days | 9 Days | 4 Days | 8天 | 8天 | 4 Days | 9 Days | 9 Days | 8天 |
Shape | Others | - | C(80°鑽石) | T(三角形) | - | S (Square) | T(三角形) | Others | Others | T(三角形) | T(三角形) | C(80°鑽石) | C(80°鑽石) | D (55° Diamond) | S (Square) | T(三角形) | T(三角形) | T(三角形) | C(80°金剛石)/ D(55°金剛石)/ S(方形)/ T(三角形)/ V(35°金剛石)/ W(六角形) | T(三角形) | T(三角形) | D (55° Diamond) | C(80°鑽石) | - | V (35° Diamond) | Others | S (Square) | T(三角形) | T(三角形) | V (35° Diamond) | T(三角形) | C(80°鑽石) | T(三角形) | C(80°鑽石) | T(三角形) | D (55° Diamond) | T(三角形) | Others | Others | Others | Others | T(三角形) | T(三角形) | Others | C(80°鑽石) |
采用 | Tapping | - | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | - | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Tapping | Tapping | 開槽/分手 | 開槽/分手 | 開槽/分手 | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Other | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | - | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Other | Tapping | 開槽/分手 | Other | 開槽/分手 | 開槽/分手 | 開槽/分手 | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
可用角數 | - | - | 4 | - | - | 8 | 6 | - | - | - | - | - | - | - | - | - | - | - | - | 6 | 6 | 2 | 1 | - | 4 | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
工作材料 | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal | - | 鋼/不鏽鋼/鑄鐵/有色金屬/耐熱合金,鈦合金/高硬度材料 | 鋼/不鏽鋼/鑄鐵/耐熱合金,鈦合金 | - | 鋼/不鏽鋼/鑄鐵/有色金屬/耐熱合金,鈦合金/高硬度材料 | 鋼/不鏽鋼/鑄鐵/有色金屬/耐熱合金,鈦合金/高硬度材料 | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | 鋼/不鏽鋼/有色金屬/耐熱合金,鈦合金/高硬度材料 | 高硬度材料 | 鋼/ Stainless Steel / Cast Iron | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal | 高硬度材料 | 鋼/ Stainless Steel / Cast Iron | 不鏽鋼/耐熱合金,鈦合金 | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | 鋼/ Stainless Steel / Cast Iron | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | - | 鋼/不鏽鋼/鑄鐵/有色金屬/耐熱合金,鈦合金/高硬度材料 | 鋼/ Stainless Steel / Cast Iron | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal | Cast Iron | Cast Iron / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | 鑄鐵/馬鉍錫terial | Non-Ferrous Metal | Non-Ferrous Metal | Cast Iron / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Cast Iron / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Cast Iron / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | 鋼/ Stainless Steel / Non-Ferrous Metal | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal | 鋼/不鏽鋼/鑄鐵/耐熱合金,鈦合金 | Cast Iron / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | 高硬度材料 | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal | 鋼/ Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy |
Breaker Application | - | - | Medium Cutting | 結束 | - | Medium Cutting | Medium Cutting | - | - | - | - | - | Medium Cutting | - | Medium Cutting | 結束 | - | - | - | Medium - Heavy Cutting | Heavy Cutting | Medium Cutting | - | 結束/ Light Cutting | Medium Cutting | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 結束 |
Rake Angle | - | - | Negative | Positive | - | Negative | Negative | - | - | - | - | - | Negative | Negative | Negative | Positive | Negative | Positive | Negative / Positive | Negative | Negative | Positive | Positive | - | Negative | Positive | Positive | Positive | Positive | Negative | Positive | Positive | Positive | Positive | Positive | Negative | - | - | - | - | - | - | - | - | Positive |
Preferred Hand | 正確的 | - | No Preferred Hand | 正確的 | 正確的 | No Preferred Hand | No Preferred Hand | 正確的 | 正確的 | 左 | 正確的 | 正確的 | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | - | No Preferred Hand | No Preferred Hand | 正確的/ Left | No Preferred Hand | No Preferred Hand | - | No Preferred Hand | No Preferred Hand | - | - | - | - | - | - | - | - | - | - | - | 正確的 | 正確的 | 正確的 | 正確的 | 正確的 | 正確的 | - | 左 |
Nose R | Others | - | 0.8 | 0.2~ Others | - | 0.8 | 0.8 | Others | Others | 0.2~ Others | 0.2~ Others | 0.2 | 0.4 ~ 1.6 | 0.4~ 1.2 | 0.4 ~ 1.6 | 0.4~ 0.8 | 0.4~ 1.2 | 0.4~ 0.8 | 0.4~ 1.2 | 0.4~ 1.2 | 0.4~ 1.2 | 0.2~ Others | 0.2~ Others | - | 0.8 | - | 0.4~ 1.2 | 0.2~ 0.4 | 0.4~ 0.8 | 0.4~ 0.8 | 0.2~ 0.8 | 0.2~ Others | 0.2~ Others | 0.2~ 0.8 | 0.2~ 0.8 | 0.4~ 0.8 | Others | Others | Others | 0.2~ 0.4 | 0.2~ 0.4 | 0.2~ 0.4 | - | Others | 0.2~ Others |
Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
凹槽寬度(用於開槽/分開) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
線程類型(用於點擊) | ISO Meter 60° | 梯形30° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 統一60°/機智55° | - | - | - | - | - | - | - |
牙齒數量(用於點擊) | 16.to 8 ~ 24 to 12 | - | - | - | - | - | - | - | 14.to 10 ~ 24 to 16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 12.~ 24 to 16 | - | - | - | - | - | - | - |
Pitch (For Tapping) | 1〜4 | 1.5~ 5 | - | - | - | - | - | 0.8~ 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
我們怎樣才能改善?
我們怎樣才能改善?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
客戶隱私政策
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please usethe inquiry form.
客戶隱私政策